220V
电压
500W
功率
0.01mg
最小吐胶量
马达
传动方式
袁先生
主营: 其他车间设备 | 智能扫地机 | 智能手环
广东省东莞市
为了简化整个传输流程,在进行灌封之前,所涉及到的双组分流体材料均已被加热——加热有利于改善流体的流动特性,因此可以完全避免气泡的产生。当加工完成后,合适的混合比例可以保证灌封剂的最佳固化。对此,研发人员特别强调,在灌胶传输被停止后,不仅可以有效地避免了材料的浪费,并且铝托盘中所灌封的表面是均匀平整。
To simplify the process, both components and material were heated - air bubbles could therefore be completely avoided due to the improved flow properties. Once the application was complete, the correct mixing ratio guaranteed optimum curing of the potting compound. Here, placed particular emphasis on a dispensing stop that reliably avoided material waste and guaranteed a homogeneous surface of the potting compound in the aluminum tray.
AB胶点胶机混合双液制冷曲线
TEKG3涂覆机,TEKG5灌胶机,TEKG5点胶机,TEKG5喷胶机TEKG2涂敷机
TEKG3涂胶机,TEKG2涂覆机,涂敷线,
AB点胶机,双液点胶机,混合点胶,微量点胶机,三防漆涂覆机
TEKG5灌胶机,TEKG5点胶机,TEKG5喷胶机TEKG2涂覆机
TEK点胶机G5微量
AB胶点胶机混合双液制冷曲线
TEKG3涂覆机,TEKG5灌胶机,TEKG5点胶机,TEKG5喷胶机TEKG2涂敷机
TEKG3涂胶机,TEKG2涂覆机,涂敷线,
AB点胶机,双液点胶机,混合点胶,微量点胶机,三防漆涂覆机
TEKG5灌胶机,TEKG5点胶机,TEKG5喷胶机TEKG2涂覆机
TEK点胶机G5微量
*采购数量: 台
采购数量不能为空
*联系信息:
联系信息不能为空
公司名称:
采购说明:
验证码不正确