非炭刷电机、可连续工作、不用担心电机发热，不用更换炭刷。

    皮带传动、占用锯片高度小，与电机和锯片同一轴心的产品比较：相同的锯片直径、切割高度增大。如用12寸锯片：我们的可切105mm高，而其它的只能切85mm高。因我们12寸的切割机所切的横截面积相当于因节省成本的非此种结构的14寸产品——故性价比较大。另外，皮带传动与需要齿轮减速的炭刷电机比较，锯片更平稳，特别当齿轮间隙增大时，从材料切割后的效果可以得到证实。

     靠板和底盘锯片通过的缝隙比较狭小，且靠板没有斜缺口，特别适合铝塑型材的切割。因为缝隙过大， 碎屑容易飞出造成危险。其它产品由于其设计以适应切割多种材料考虑，特别是木材的切割，反而不适合切割铝塑型材的行业使用。

    注意：

     切割材料时，必须轻轻地将正常运行中的锯片切入材料，禁止使劲强压硬推。

     禁止倒转，倒转会导致掉齿，发生危险。切铝机

      使用中听到异常声音，看到异常晃动、切面不平时，请马上停止作业，查找异常原因。

      切割时，禁止突然把锯片停止在被切割物中间。停止在切割物中间，会导致锯齿脱落、锯片变形。

      切割请使用零号柴油喷油，起到降温防锈作用。

J300 Electrically Operated Precise Turntable Cutting Machine

1.Product introduction:  This machine was popular product which developed in view of the pint-size customers and the flowing workers by our company in recent years. It has become one of our company best-selling products for its reasonable structure, fine materials and satisfying effect.

2.Product characteristic:

1. Ball bearing precision turntable structure makes angle swinging flexible and accurate.

2.Work table and the back’s slit is narrow, it is better for the chipping removing.

3. Swinging nose connection with the precision bearing branch structure makes the effect of cutting to be satisfying.

4. It is useful for flowing workers for its assembling and dismantling type and the leftable work table.