(i)      General manufacturing tolerances of ± 32 kg/m3 or ± 2 lb/ft3 apply

(i)适用于一般制造业的公差是32公斤/立方米或者2英磅/ft3.

(ii)    Performed at maximum operational pressure for 168 hours at 23°C on Ø25.4mm, 50.8mm long test specimens。

Ø25.4mm, 50.8mm长的样品在23℃下最高运行压力了168个小时。

The information given within this document is of a general nature only. The values given must be considered as typical and do not constitute a product specification. No liability for loss or damage can be accepted by GDGL. Unless others wise stated, all properties are quoted at ambient conditions. All information contained herein is the propriety information of GDGL and must not be copied or disclosed to any other party without the prior written permission of GDGL. The information contained herein must only be used for the Specified Purposes for which it was provided.

本文件提供的资料只属一般性质。所提供的数值必须被认为是典型的，并且不构成产品规格。任何损失或者损害的赔偿责任都不能被GDGL.接受。除非另有证明，所有的属性都是在环境条件下引用的。本文件所包含的所有信息均为GDGL.相关信息。未经GDGL.的书面许可。不得将其复印或外泄给任何其他地方。本文件所包含的信息只可用于所提供资料的制定用途。

材料说明：

 本产品所使用的主要材料如下：改性环氧结构粘接剂，高性能玻璃微珠，高性能陶瓷微珠，以及相关改性相容产品。

国内部分案列：

曾供给，中船重工，深渊研究院。