产品名称：迷你无线室内空气质量监测仪
品牌：PPM
产地：英国
型号：Mini IAQ Profile

迷你无线室内空气质量监测仪Mini IAQ Profile介绍：

Mini IAQ Profile 系统旨在提供建筑物室内空气质量的可视化表示，作为与病态建筑综合症等条件相关的建筑物管理标准的一部分. 由于大量单元可以联网，系统可以显示不同位置选定的 IAQ 参数浓度随时间的精确变化。Mini IAQ Profile Monitor 系统使用户能够控制和运行多个不同的无线 IAQ 采样单元——所有这些单元都通过复杂可靠的 ZigBee 无线网状系统进行通信。网状网络系统具有成本效益、易于安装和使用简单：组成网状网络的节点自动配置**信号路径。无线网状系统的其他优点是它是自我修复的，这意味着即使节点发生故障或连接变坏，网络仍然可以运行。结果，形成了一个非常可靠的网络。

Mini IAQ Profile Monitor 结合了多种先进的气体传感器技术来监测目标气体，包括 NDIR、PID 和电化学，并提供四种主要配置，所有这些配置都可以联网在一起。


配置1：
迷你无线电视

• —种无线htv解决方案，可用于监测建筑物中空气中的甲醛含量。
• 还提供对该区域内的温度和湿度水平的监测。
• 额外的继电器选项允许控制警报和空调系统。

• 内置温度和湿度模块，可配备多达3个IAQ参数传感器。这些包括但不限于:
• 二氧化氮(NO2)
• —氧化碳(CO)
• 二氧化碳(CO2)
• 二氧化硫(SO2)
• 总挥发性有机化合物(TVoc)
• 臭氧(O3)
• 氨(NH3)
• 甲烷(CH4)
• 烟
• 运动传感器

• 允许监澳建到丛Bio湿度水平。
• 可以与Zigbee 网状网络上的其他迷你无线单元和IAQ监视器联网。

• 带有3个内置继电器的专用无线系统，用于控制各种输出，例如声音/视觉警报系统和其他第三方系统。
• 还提供对该区域内的温度和湿度水平的监测。
• 可以与Zigbee 网状网络上的其他迷你无线单元和IAQ监视器联网

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。
英文原文：

The Mini IAQ Profile system has been designed to give a visual representation of indoor air quality in buildings, as part of the buildings management standards in relation to conditions such as Sick Building Syndrome. Since a great number of units can be networked, the system can show prescise changes in concentration of selected IAQ parameters in various locations over time. The Mini IAQ Profile Monitor system enables the user to control and run several different wireless IAQ sampling units — all communicating together via the sophisticated and reliable ZigBee wireless mesh system. The mesh network system is costeffective, easy to install and simple to use: the nodes which make up the mesh automatically configure the optimal signal route. Other advantages of a wireless mesh system is that it is self healing meaning that the network can still operate even when a node breaks down or a connection goes bad. As a results, a very reliable network is formed. The size of the wireless mesh can be easily extended by simply adding new Mini IAQ Monitor units or even the larger IAQ monitor units, as each one is also a router for it's neighbours.


The Mini IAQ Profile Monitor incorporates a variety of advanced gas sensor technologies to monitor the target gases including NDIR, PID and Electrochemical and is available in four main configurations, all of which can be networked together.


Configuration 1：
Mini Wireless htv

• A wireless htv solution, which can be used to monitor airborne formaldehyde levels in a building.
• Also provides monitoring of temperature and humidity levels within the area.
• Additional relay option to allow control of alarm and air-conditioning systems.

• Nitrogen Dioxide (NO2)
• Carbon Monoxide (CO)
• Carbon Dioxide (CO2)
• Sulphur Dioxide (SO2)
• Total Volatile Organic Compounds (TVOC's)
• Ozone (O3)
• Ammonia (NH3)
• Methane (CH4)
• Smoke
• Motion Sensor

• Allows for monitoring of temperature and humidity levels within a building.
• Can be networked with other mini wireless units and IAQ monitors on the Zigbee mesh network.

• A dedicated wireless system with 3 inbuilt relays to control various outputs such as audible/ visual alarm systems and other third party systems.
• Also provides monitoring of temperature and humidity levels within the area.
• Can be networked with other mini wireless units and IAQ monitors on the Zigbee mesh network