美国global-water倾斜浮球开关WA150-找商网

美国global-water倾斜浮球开关WA150

发货河北省保定市

参数

global water

品牌

是

是否进口

美国

产地

WA150

型号

联系商家

马经理

点击拨打

河北恒仪电子科技有限公司

5年店

进店看看

主营：仪器仪表制造业

河北省保定市

产品名称: 倾斜浮球开关

型号系列:WA150

品牌:global water

产地:美国

价格:成交价格需联系客服

Global Water 的 WA150 倾斜式浮球开关是一种廉价、高效且高度可靠的液位检测器，适用于开放式容器、集水池和池塘。

美国global water倾斜浮球开关WA150概述

特征

• 可靠的机械开关动作

• 坚固的 EPDM 外壳

• 开关增加或减少电平

Tilt Float 开关的模制橡胶浮子具有一体式三芯电缆，并在位于橡胶浮子内部的防振支架上的微型开关设备上运行。WA150 倾斜浮球开关包括一个可调节的电缆重量，可以将其悬挂在水面上方的一个方便位置，而不必将其系在您想要的驱动点。Tilt Float Switch 的橡胶浮子由 EPDM 制成，EPDM 是一种合成橡胶，具有刚性和耐用的特性，使用寿命长，并且耐高温、氧化、臭氧和天气老化。作为一种非极性弹性体，三元乙丙橡胶具有良好的电阻率，以及对极性溶剂如水、酸、碱、磷酸酯和许多酮类和醇类的耐受性。

WA150 倾斜浮球开关的基本工作原理是随着液位的上升，橡胶浮球将上升，使微动开关倾斜并产生可用于操作电机启动器、打开或关闭阀门或启动指示器的信号根据需要发出警报。Tilt Float 开关的 3 引线电缆允许在增加或减少的水平上操作。一根引线是普通的，一根是常开（NO），另一根是常闭（NC）。

倾斜浮动开关安装说明

WA150 倾斜浮动开关没有具体的安装问题。但是，倾斜浮动开关的引线电缆应支撑在封闭的水箱中。此外，在开放式水箱、油底壳或水池中，将倾斜浮动开关的导线夹在一侧是有利的，尤其是在遇到过度湍流时（包括尼龙电缆扎带）。

如果预计会出现这种湍流，为了减轻快速切换条件的影响，建议使用维护电路来保护倾斜浮动开关的微动开关并切断相关设备（例如泵）启动器的任何颤动。

WA150 倾斜浮动开关包括一个可选的稳定重量和橡胶“O”形环。这可以安装在倾斜浮动开关的引线电缆上的任何位置。

美国global water倾斜浮球开关WA150规格

中文内容来自机器翻译，内容仅供参考，实际内容可参考原厂介绍或以合同为准。

英文原文：

Global Water’s WA150 Tilt Float Switch is an inexpensive, efficient and highly reliable level detector for open vessels, sumps and ponds.

Overview

FEATURES

• Reliable mechanical switch action

• Rugged EPDM housing

• Switches on increasing or decreasing levels

The Tilt Float Switch's molded rubber float has an integral three conductor cable and operates on a micro-switch device that is located inside the rubber float on an anti-vibration mount. The WA150 Tilt Float Switch includes an adjustable cable weight, which allows it to be suspended from a convenient location above the water rather than having to tie it off at your desired actuation point. The Tilt Float Switch's rubber float is constructed of EPDM, a synthetic rubber with rigid and durable characteristics for long service life and resistance to heat, oxidation, ozone and aging due to weather. As a non-polar elastomer, EPDM has good electrical resistivity, as well as resistance to polar solvents such as water, acids, alkalies, phosphate esters and many ketones and alcohols.

The WA150 Tilt Float Switch's basic operating principle is that as the fluid level rises the rubber float will rise, causing the micro-switch to tilt and generate a signal that can be used to operate a motor starter, open or close a valve or actuate indicator alarms as required. The Tilt Float Switch's 3-lead cable allows operation on increasing level or decreasing level. One lead is common, one is normally open (NO), the other is normally closed (NC).

Tilt Float Switch Installation Notes

There are no specific installation concerns for the WA150 Tilt Float Switch. However, the Tilt Float Switch's lead cable should be supported in an enclosed tank. Additionally, in an open tank, sump, or pond, it is advantageous to clip the Tilt Float Switch's lead cable to the side, especially if excessive turbulence is experienced (a nylon cable-tie is included).

To alleviate the effects of rapid switching conditions if such turbulence is expected, it is recommended that a maintaining circuit be used to both safeguard the Tilt Float Switch's micro-switch and cut out any chatter from the starters of associated equipment, such as pumps.

An optional stabilizing weight and rubber "O" ring are included with the WA150 Tilt Float Switch. This may be installed at any point on the Tilt Float Switch's lead cable.

Specifications