PRS-801B电阻系统美国PROSTAT好渠道-找商网

PRS-801B电阻系统美国PROSTAT好渠道

发货上海市嘉定区

参数

PROSTAT

品牌

0.1-10W

功率

2.5KG

重量

PRS-801B

规格

联系商家

林烨

点击拨打

上海菱联自动化控制技术有限公司

4年店

进店看看

主营：自动化控制 | 自动化成套控制系统 | 自动化控制系统

上海市嘉定区

PRS-801B电阻系统美国PROSTAT好渠道

PRS-801B电阻系统

高达200兆欧的数字表面电阻计

▲精确的宽范围电阻测量值：0.01Ω 至2.00x1014Ω

▲从1.00到±2%的准确度Ω 至9.99x1010Ω

▲用于低电阻测量的可变电压为0.1 mv至9.99 V

▲恒定测试电压10V和100V，符合ANSI/ESD S20标准。20

▲自动电阻范围控制

▲自动测试电压控制

▲使用可充电锂离子电池组

▲一次充电大约进行8000次测量（一般480小时）

▲999数据集存储器

▲使用Prostat Connect 2.0分批或单独下载到Excel®中

▲使用Micro USB电缆充电和下载数据

▲两小时内充电

▲主仪表2年有限保修

产品概述：

对你的测量有信心

PRS-801B电阻系统提供了分辨率和精度，可根据所有ESD电阻测量协会文件，如ESD TR53、ANSI/ESD S4，有效测量地板、工作表面、手推车、服装、包装、平面材料的点对点电阻（Rtt）和接地电阻（Rtg）。1，ANSI/ESD S7。1，ANSI/ESD STM97。1，ANSI/STM S11。11，ANSI/STM S11。12和ANSI/STM S11。13

产品鉴定的理想工具

PRS-801B数字电阻表具有测量速度、宽量程和准确度的卓越性能组合。其恒定测试电压系统非常稳定，与实验室水平的台式仪器一致。

最宽量程仪表

PRS-801B的宽量程为测量应用提供了最大的灵活性。PRS-801B是唯一一款量程为0.01的电池供电仪表Ω 至2.00x1014Ω. 事实上，PRS-801B在1中充当3个工具：

测量范围为0.01至1.0x104的低电阻测距仪Ω. 大多数便携式仪器在1.0x103欧姆或以下无法准确测量。因此，典型的ESD审核员必须携带数字万用表，用于对接地连接进行低电阻检查。

符合ANSI/ESD S20标准的宽电阻范围审计仪表。20和TR53从1.00x103到1.00x1011的程序Ω. 测量指南要求在设施ESD计划的电阻要求以下十年到以上十年之间进行精确测量。根据项目要求，PRS-801B很容易超过这一要求30年。

精密高阻测量仪器，用于包装符合S541标准，材料和产品的测试和验收验证。

很少有竞争性仪器可以精确测量1.00x1011欧姆或以上，而PRS-801B可以轻松测量2.00x1014欧姆。

没有在PRS-801的大范围内运行的审计仪器或实验室台式仪器

旨在提高生产率和工作效率

易于阅读的6位7段彩色大屏幕

在显示屏上轻松切换指数和欧姆测量值

可存储和调用多达999个数据集的内部存储器

可编程彩色LED指示电阻范围

方便的检修门，在不破坏校准密封的情况下快速更换电池

显示屏上的电池状态指示灯

使用时充电，无需取出电池

测量灵活性

连接到几乎任何双线夹具或电极配置。PRS-801B的简单¾英寸端子间距提供了与各种电极和夹具的连接。

端子设计允许使用机械屏蔽或非屏蔽香蕉插头引线

间距为¾英寸的BNC适配器直接安装在PRS-801B端子上，用于使用宽量程探头和夹具进行测量

仪器参考允许使用第三线仪器参考，以最小化外部磁场对精密夹具测量的影响

电气化时期

PRS-801B是当今精密测量市场上速度最快的测量仪器之一。实验室测试证实，PRS-801B可以在2.5秒内测量0到1.0x1012欧姆。因此，根据ANSI/ESD STM 11.11《平面材料的表面电阻》，其规定的通电时间（EP）为15秒。此外，其EP自动调整，以确保显示稳定的测量值。

多种操作模式

PRS-801B具有自动、手动、自动-手动和连续操作模式，以及指数显示或标准数字显示Ω, KΩ, MΩ, GΩ 和TΩ. 它易于使用和阅读。几十年来，使用从<103到>1014的多个LED进行测量总结，其颜色可由用户编程为红色、绿色或黄色。

恒定测试电压

PRS-801B有三个测试电压范围，为可重复测量提供稳定的测试参考。在自动模式下，仪器会自动为被测电阻选择合适的测试电压。

<10伏：0.01至9.99x103Ω

在0.1 mV到9.99V的范围内，<10V是可变的

10伏–负载下的恒定电压

恒定在1.00x104到9.99x105之间Ω

100伏–负载下的恒定电压

恒定在1.00x106到2.00x1014之间Ω

在一次充电中进行数千次测量

新型高性能电池利用锂离子技术，一次充电可使你保持近500小时的强劲动力。通常情况下，PRS-801B在充电前会进行大约8000次测量。有了易于接近的电池门，你可以快速更换电池。

801B-012电池组已经过测试，并被发现符合“联合国示范法规、测试和标准手册、ST/SG/AC.10/11/Rev.7第三部分第38.3小节”的标准，也称为“UN38.3”。因此，它们可以通过任何方式在国际上不受限制地运输。

高质量的测试线索

Prostat的10英尺测试引线与PRS-801B一起提供，由数百根细铜线组成，具有灵活性和准确性。每根测试引线的外绝缘均为高等级硅，具有极高的电阻，以最大限度地减少测量误差。这些引线设计用于在高达1.00x1012的制造环境中进行方便的审计测量Ω.

800PSL和800TVL高性能测试引线线束设计用于1012至1014范围内的高电阻测量。它包括一根屏蔽负极测试引线，以确保准确性，并将来自人员和设备的电气干扰降至最低。屏蔽直接连接到PRS-801B仪器参考和夹具接地。

使用Prostat Connect 2.0下载数据

PRS-801B不仅可以快速进行精确测量，还可以立即记录测量数据，或批量下载到Excel®电子表格程序中。这最大限度地减少了换位错误，加快了精确测量的速度。随附的Prostat Connect 2.0软件易于加载和使用。PRS-801B使用提供的USB电缆连接到计算机的USB端口。

▲在自动连接模式下，您可以控制PRS-801B测量顺序，以便在每次测量结束时将每个数据点下载到电子表格中。电子表格光标自动移动到下一个数据输入单元，为后续测量做准备。

▲一旦多达999个数据点存储在PRS-801B的内存中，它们就可以在以后下载到电子表格中。每个数据点将被放置在自己的电子表格单元中。

▲使用Connect 2.0时，会为每个测量集维护一个备份文本文件，其日期、时间和位置（如果需要）。

▲Connect 2.0实用程序与从XP到Windows 10的32位和64位版本的Windows兼容。

PRS-801B Resistance System

DIGITAL SURFACE RESISTANCE METER UP TO 200 TERAOHMS

▲Accurate Wide Range Resistance Measurements: 0.01 Ω to 2.00x1014 Ω

▲Accuracy of ±2% from 1.00 Ω to 9.99x1010Ω

▲Variable Voltage 0.1 mv to 9.99 V for low resistance measurements

▲Constant Test voltages 10V and 100V meeting ANSI/ESD S20.20

▲Auto Resistance Range Control

▲Auto Test Voltage Control

▲Uses a Rechargeable Li-ion Battery Pack

▲Takes Approximately 8,000 Measurements on a Single Charge (480 hours typical)

▲999 Data Set Memory

▲Download to Excel® in Batches or Individual Measurements with Prostat Connect 2.0

▲Uses Micro USB Cable for Charging and Downloading Data

▲Charges in 2 Hours

▲2-year Limited Warranty on Main Instrument

Product Overview：

Have confidence in your measurements

The PRS-801B Resistance System provides the resolution and accuracy to efficiently measure resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of floors, worksurfaces, carts, garments, packaging, planar material in accordance with all of the ESD Association documents for resistance measurements, such as ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1, ANSI/STM S11.11, ANSI/STM S11.12 and ANSI/STM S11.13.

The ideal tool for product qualification

The PRS-801B digital resistance meter has an outstanding performance combination of measurement speed, wide range and accuracy. Its constant test voltage system is extremely stable and consistent with lab level, bench top instruments.

The widest range meter

The PRS-801B’s wide range offers the maximum flexibility in measurement applications. The PRS-801B is the only battery operated meter with a range of 0.01 Ω to 2.00x1014 Ω. In fact, the PRS-801B serves as 3 instruments in 1:

A low resistance range meter for measurements from 0.01 to 1.0x104 Ω. Most portable instruments do not measure accurately at or below 1.0x103 ohms. Therefore, a typical ESD Auditor must carry a digital multimeter for low resistance checks of ground connections.

A wide resistance range audit meter to meet ANSI/ESD S20.20 and TR53 procedures from 1.00x103 to 1.00x1011 Ω. Measurement guidelines require accurate measurements from one decade below to one decade above the resistance requirements of a facility’s ESD program. The PRS-801B easily exceeds this requirement by as much as 3 decades, depending on program requirements.

Precision high resistance measurement instrument for Packaging to S541 Standards, material and product testing and acceptance verification.

Few competitive instruments can measure accurately up to or beyond 1.00x1011 ohms, while the PRS-801B comfortably measures up to 2.00x1014 ohms.

There are no audit instruments or laboratory bench top instruments that perform in the PRS-801’s wide range

Designed to be more productive and work more efficiently

Large easy to read 6 digit, 7 segment color display

Easily toggle between exponential and ohmic measurements on the display

Internal memory capable of storing and recalling up to 999 data sets

Programmable color LED’s indicating resistance ranges

Easy-access door for fast battery changes without breaking the calibration seal

Battery status indicator on the display

Charges while being used, without removing the battery

Measurement flexibility

Connect to virtually any 2-wire fixture or electrode configuration. The PRS-801B’s simple ¾ inch terminal spacing provides connectivity to a variety of electrodes and fixtures.

Terminal design allows use of mechanically shielded or non-shielded banana plug leads

BNC adapters with ¾ inch spacing mount directly to the PRS-801B terminals for measurements with wide range probes and fixtures

An instrument reference allows use of a third wire instrument reference to minimize effects of extraneous fields on precision fixture measurements

Electrification period

The PRS-801B is one of the fastest measurement instruments in today’s precision measurement market. Laboratory tests confirm the PRS-801B can measure from 0 to 1.0x1012 ohms in 2.5 seconds. Thus, its specified electrification period (EP) is 15 seconds in accordance with ANSI/ESD STM 11.11 Surface Resistance of Planar Materials. Furthermore, its EP is automatically adjusted to insure a stable measurement is displayed.

Multiple modes of operation

The PRS-801B has Automatic, Manual, Auto-Manual and Continuous operational modes, plus exponential display or standard numeric display in Ω, KΩ, MΩ, GΩ and TΩ. It’s easy to use and read. Measurements are summarized in decades using multiple LED’s from <103 to >1014, whose colors are user programmable to be RED, GREEN or YELLOW.

Constant test voltages

PRS-801B has three Test Voltages ranges that provide stable test references for repeatable measurements. In AUTO mode, the instrument automatically selects the proper test voltage for the resistance being measured.

<10 Volts: 0.01 to 9.99x103 Ω

<10V is variable across this range from 0.1 mV to 9.99V

10 Volts – Constant Voltage under Load

Constant at 1.00x104 to 9.99x105 Ω

100 Volts – Constant Voltage under Load

Constant at 1.00x106 to 2.00x1014 Ω

Take thousands of measurements on a single charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for almost 500 hours on a single charge. Typically, the PRS-801B will take approximately 8,000 measurements before you need to charge it. And with the easy-access battery door you can make battery swaps fast.

The 801B-012 battery packs have been tested and were found to comply with the criteria of “UN Model Regulations, Manual of Test and Criteria, ST/SG/AC.10/11/Rev.7 Part III, subsection 38.3”, also known as “UN38.3”. As a result they can be shipped unrestricted internationally by any means.

High quality test leads

Prostat’s 10 foot test leads supplied with the PRS-801B consist of hundreds of fine strands of copper that offer flexibility and accuracy. The outer insulation of each test lead is high grade silicon with an extremely high resistance to minimize measurement errors. These leads are designed for convenient audit measurements in the manufacturing environment up to 1.00x1012 Ω.

The 800PSL and 800TVL high performance test leads harness are designed for high resistance measurements in the 1012 to 1014 range. It includes a shielded negative test lead for accuracy and minimum electrical interference from personnel and equipment. The shield is connected directly to the PRS-801B instrument reference and fixture ground.

Download data with Prostat Connect 2.0

Not only does the PRS-801B make accurate measurements quickly, it documents measurement data immediately or in batch downloads to your Excel® Spreadsheet program. This minimizes transposition mistakes and speeds up precision measurements. The included Prostat Connect 2.0 software is easy to load and use. The PRS-801B connects to your computer’s USB port using the provided USB cable.

▲In the Auto Connect mode, you can control the PRS-801B measurement sequence so that each data point is downloaded to the spreadsheet at the conclusion of each measurement. The Spreadsheet cursor automatically moves to the next data entry cell in preparation for the subsequent measurement.

▲Once as many as 999 data points are stored in the PRS-801B’s memory, they can be downloaded to a spreadsheet at a later time. Each data point will be placed in its own spreadsheet cell.

▲When Connect 2.0 is used, a backup Text file is maintained for every measurement set, its date, time and location should you desire.

▲The Connect 2.0 utility is compatible with 32-bit and 64-bit version of Windows from XP all the way to Windows 10.