深圳沃客密科技有限公司

The UV-MICRO PUCK Integrator is a high quality UV-measuring system used to measure the UV-dose in

hard accessible areas of UV-curing units. With its detachable wireless sensor unit it is specially

practicable to be used in narrow WEB – Presses, in Label Printing machines as well as for UV-3D

Measuring of 3D objects.

一级代理！UV-MICRO PUCK为什么好用？

In its standard version the UV-Micro Puck is measuring the area of:

UV 230-410 nm

The UV-MICRO PUCK Integrator is available in various different UV-spectral ranges. This fact makes it

possible to chose the UV-Micro Puck to fit the required measuring situation best.

After the measuring cycle the sensor unit is connected to the hand unit for the read out of the UV-dose in

mJ/cm². Upon read-out, the measuring value is stored automatically in the hand unit and can be called up

any time as long as it is not overwritten by storing a new measuring result.

After read-out, the measuring value keeps also stored in the UV-sensor unit. The sensor internal storing

of the measuring value enables additive measurements.

一级代理！UV-MICRO PUCK为什么好用？

Reset of the sensor unit to zero is made by connecting to the base unit and pressing the „Reset” button of

the hand unit. This is possible with the hand unit turned on or off.

The display range can be changed to read low and high UV-energy values.

The UV-MICRO PUCK measuring system consists of:

1. the hand unit with the electronics and display

2. the UV-sensor unit with sensor opening and plug*.

The UV-MICRO PUCK Integrator is available with sensors in various shapes and UV-spectral areas:

Item 4.1.  UV-Micro Puck

UV 230 – 410 nm (Standard)

UV-A 315 – 410 nm

UV-B 280 – 315 nm

UV-C 230 – 280 nm

DIAZO 350 – 460 nm

UV-V 395 – 445 nm

Low UV-C  160 – 200 nm

Low UV-C  160 – 240 nm

Low UV-C  160 – 320 nm

*for further details of available sensors please see separate data sheet item 4.3ff