水泥箱式生态护坡模具的原料介绍与使用方式会进行详细的介绍，模具使用的是钢板作为它的主要生产原料，使用水泥箱式生态护坡模具生产出来的箱式护坡简单来说相当于把一个变电站放到一个钢板做的房子内，箱式护坡是可以全部整体移动的，使用起来非常的方便，变压线需要安装在干净、干燥、防鼠、全封闭的地方。

使用准备：

一些灰尘或者是杂质的黏连会影响到模具的使用，也会影响水泥箱式生态护坡模具的质量，工人要将模具清理干净，并且核对可使用模具的尺寸与型号，避免模具的尺寸出现了误差，影响到生态护坡砖的正常制作。检查模具无误后就需要正常进行应用了，无论是钢模具还是塑料模具的应用都是要进行刷油的，不单单是起到一个润滑的效果，更多的是进行模具内腔的保护，

加工过程：

因为整个制作过程基本都是在使用模具生产，施工人员只要按照具体的步骤进行生产就可以了，跟很多的钢模具的使用方式相同，但是注意需要提前把制作场地收拾干净，避免模具沾水，或者制作场地不干净造成模具受损的现象出现，水泥箱式生态护坡模具的尺寸不是固定的，施工人员可以根据自己的真实工程需求跟模具制作工厂进行沟通制作出符合自己工程的模具。The introduction and use of cement box ecological slope protection mold materials will be introduced in detail. The die uses steel plate as its main production material. The box slope protection produced by using box slope protection mold is simply equivalent to putting a substation in a steel plate house. The box slope protection can be moved as a whole and it is very convenient to use, The pressure changing line shall be installed in a clean, dry, rat proof and fully enclosed place.

Preparation for use:

Some dust or impurities will affect the use of the mold, and also affect the quality of the cement box ecological slope protection mold. Workers should clean the mould, check the size and model of the available mold, avoid the error of the mold size and affect the normal production of ecological slope protection brick. After checking the mold is correct, it needs to be applied normally. Whether it is used in steel mold or plastic mold, it is necessary to brush oil, not only to play a lubrication effect, but also to protect the inner cavity of the mold,

Processing process:

Because the whole manufacturing process is basically using mold production, the construction personnel can only follow the specific steps to produce, and the same as many steel mold use methods, but pay attention to the need to clean up the production site in advance to avoid mold water, or the mold damage caused by the unclean manufacturing site, The size of the box slope protection mold is not fixed. The construction personnel can communicate with the mold manufacturing factory to make the mold which conforms to their own project according to their real engineering needs.