1、本机采用台湾“台达”PLC系统,彩色触摸屏控制，提高控制精度 ,操作简便，整套系统安全稳定性好,全自动正负压

成型一-体机集成型、冲切、堆叠、机械手、输送- -体化全自动吸塑机,该机为正负压成型,极大的提高了产能与质量，

具高度稳定的运作功效,极度成熟的生产工艺。

2、吸塑成型生产时间最快可达3秒- -模,冲切速度可达每分钟32次,冲裁精度+0.5mm，且对产品没有损伤，堆叠定量取

产品精准无误,对产品毫发无损。

3、全自动正负压流程:成型-→冲切-→机械手抓取-→堆叠计数量,不需要人工冲切,减少人工冲切带来的一系列的质量问

题及繁琐的后道工序,节省场地,减少产品二次污染,节约人工成本,提高品质。

1. This machine adopts Taiwan's "delta" PLC system, color touch screen control, improves control accuracy, simple operation, good safety and stability of the whole

system. The full automatic positive and negative pressure molding machine integrates molding, punching, stacking, manipulator, and transportation. This machine

is a full automatic plastic suction machine, which greatly improves production capacity and qualit, and has highly stable operation effect Mature production

process.

2, the first mock exam time is 3 seconds, the punching speed can reach 32 timnes per minute, the blanking accuracy is + 0.5mm, and the product is not

damaged. The stacking product is accurate and the product is intact.

3. Full automatic positive and negative pressure process: forming→punching→manipulator grasping→stacking and counting quantity, no need for manual

punching, reducing a series of quality problems caused by manual punching and cumbersome subsequent process saving site, reducing secondary pollution of

products, saving labor cost and improving product quality.