日本VENN
品牌
RD-14H
型号
铸铁
材质
法兰
连接形式
黄先生
主营: 水利管理业 | 通用设备制造业
上海市奉贤区
日本阀天RD-14H减压阀详细描述:
RD-14H valve is suitable for: oil, pressure 1.0Mpa following caliber range: 20-150mm Suitable temperature: 5-90 ℃ Body material: cast iron valves day Japan RD-14H is by adjusting the valve, the inlet pressure is reduced to the outlet pressure of a need, and rely on the energy of the medium itself, so that automatically maintain a stable outlet pressure valve.
RD-14H减压阀适用于:压力1.0Mpa以下的油品,口径范围:20-150mm 适用温度:5-90℃ 阀体材质为:铸铁 日本阀天RD-14H减压阀是通过调节,将进口压力减至某一需要的出口压力,并依靠介质本身的能量,使出口压力自动保持稳定的阀门。
Operation:
1, closed gate valve before the open gate valve after low pressure downstream manufacturing environment;
2, the adjusting screw counterclockwise rotation to the uppermost position (relative to the minimum outlet pressure), and then close the valve after the valve;
3. Slowly open the gate valve to fully open before;
4. Slowly turn adjustment screw clockwise, the pressure is adjusted to the desired outlet pressure (gauge pressure in the valve prevail); adjusted, the lock
Nut, open the valve gate valve;
5, such as export when adjusting the pressure higher than the set pressure, must start from the first step to re-adjust, which can only tune from low to high pressure.
日本阀天RD-14H减压阀操作方式:
1、关闭减压阀前的闸阀,开启减压阀后的闸阀,制造下游低压环境;
2、将调节螺钉按逆时针旋转至最上位置(相对最低出口压力),然后关闭减压阀后闸阀;
3、慢慢开启减压阀前的闸阀至全开;
4、顺时针慢慢旋转调节螺钉,将出口压力调至所需要的压力(以阀后表压为准);调整好后,将锁紧
螺母锁紧,打开减压阀后闸阀;
5、如在调整时出口压力高于设定压力,须从第一步开始重新调整,即只能从低压向高压调。
DBB双截断球阀 DBB球阀
BOA-S系列KSB导热油Y型过滤器
S390T-2W伯尔梅特灌溉电磁阀
粉体真空取样阀
典昭NTG50/25管夹阀
替代EBRO依博罗气缸/执行器 EB SYD SYS系列
KITZ北泽C-1/C-UTE气动球阀
柱塞式保温夹套取样阀
粉体真空取样阀
FL41H衬氟下展式手动放料阀
FL41H下展式放料阀
F41H气动上展式放料阀
*采购数量: 台
采购数量不能为空
*联系信息:
联系信息不能为空
公司名称:
采购说明:
验证码不正确