美国MG220焊条
品牌
MG220
型号
否
是否进口
1.0-4.0mm
焊芯直径
董现肖
主营: 金属制品、机械和设备修理业 | 金属制品业 | 批发业
河北省邢台市
PROCEDURE:
Rough grind surfaces to be joined or built up. Paint surfaces to be joined and protected from oxidation with MG
130F flux. When using flux coated rods it is not necessary to use the paint-on flux unless additional protection
is required. Always use a neutral flame concentrated on the base metal, not on the molten alloy. Keep torch in
constant motion to prevent overheating of local areas. When used as a joining alloy small rods are
recommended but for surfacing and build-up the larger diameter rods should be used. Additional passes can
be applied without the need of removing flux residue from previous passes. Allow part to cool slowly. Remove
flux by chipping and wire brushing.
河南 ER430NiMo不锈钢焊丝 耐磨不锈钢合金焊丝 厂家直销
万能铜铝药芯焊丝 铜铁铝不锈钢都可以焊接的焊丝
厂家直销特尔鑫金属粉末 碳化钛 超细碳化钛粉325目
上海斯米克铸铁焊条Z308焊条厂家直销
现货供应99.99%金属铬粉末 高纯铬粒 超细铬粉
供应热销TIG-R30耐热钢焊丝 厂家直销R71直条耐热钢焊丝 焊条
重庆 特尔鑫 4043铝焊丝2.0氩弧焊铝合金焊丝1.6mm ER4043铝硅焊丝
大西洋CHS137不锈钢焊条价格 大西洋A137焊条 批发
四川 大西洋CHR507Mo阀门堆焊焊条 D507mo耐磨焊条 批发
湖北 大西洋CHS202不锈钢焊条 大西洋A202电焊条 批发
重庆 特尔鑫 ER307不锈钢焊丝价格 S307不锈钢气保焊丝 批发
江苏特尔鑫 E6010高纤维素焊条价格 E6010立向下焊条 批发
*采购数量: 公斤
采购数量不能为空
*联系信息:
联系信息不能为空
公司名称:
采购说明:
验证码不正确